Products by Nitronic

Coax Cable Stripping Machine ST-730

Introduction

Following products are available: the automatic coaxial cable stripping machine ST730, the high precision wire stripping machine ST215 / ST215W and our small but powerful hand tool MiniStrip. For special applications we can modify our machine or tools to meet your requirements.

*ST730

Programmable stripping machine for coaxial cables up to 7mm OD.

*ST215 / ST215W

High precision stripping machine for cables up to 2.5mm OD.

*Ministrip

High precision stripping tool for cables up to 2.5mm OD.

 


Hardness Tester

Introduction

The small HRC 3070 is a HiTech portable device for testing the hardness of metals, no matter what the location.This light, compact device has been developed using state of theart technology, based on the proven rebound method. Great care has been taken to ensure ease of use; no switching on and off, no buttons, no wires. All you have to do is pull back, take the measurement and read the hardness value direct in HRC. The instrument turns itself on automatically upon the first test and turns itself off again after about 20 seconds.

Application

  • Big, heavy workpieces or fixed equipment parts.
  • Production line parts during the production process.
  • Material identification at material warehouses.
  • Measurements at hard-to-reach places .

Measurement prerequisites:

  • Minimum surface diameter 10mm
  • Smallest measurement surface radius of curvature 30mm
  • Materials weighing less than 5 kg with thin walls are to be set on a solid support to protect from vibrations
  • Materials weighing less than 2 kg have to be set on a solid support using paste adhesive
Download Brochure

Ministrip

Introduction

The all new cable striping tool Nitronic Ministrip was specially developed for thin cables.It features a patented four-blade system, which provides accurate and exactly repeated stripping of cables. the high precision avoids damage to wires or fibres.they can be used in military applications.The high quality of the product guaranties aprecise repetitiveness.

Features

  • Wire size range from 0.16 mm to 1.5 mm (15 - 34 WG) depending on isolation type down to 0.10 mm(38 AWG).
  • Outer cable diameter max. 2.5 mm.
  • Stripping length upto 15 mm.
  • Four cutting blades on one plane..
  • Rotating cut.
  • No wire damage.
  • Fast and easy change of length and diameter.
  • Mobile, no power supply.
  • HSS blades replaceable by user without tools.
  • Suitable for teflon,PVC, Kynar and kaptaon isolation.

Measurement prerequisites:

  • Minimum surface diameter 10mm
  • Smallest measurement surface radius of curvature 30mm
  • Materials weighing less than 5 kg with thin walls are to be set on a solid support to protect from vibrations
  • Materials weighing less than 2 kg have to be set on a solid support using paste adhesive
Download Brochure