Product (instrument) used under concrete working circumstances.
A1040 MIRA 3D
Introduction
Ultimate Ultrasonic Tomograph for quality assessment of concrete structures.
Features
- True3D® Tomography - FMC / TFM in real time
- A-DPC® transducers with unbeatable penetration & sensitivity
- Open-Crack sizing - quantitative crack assessment
- Extendable aperture by multiple connected array units
- Variable frequency 10-100 KHz
- INTROVIEW® software for 3D visualization & analysis
Special Features
- Real-time 3D Imaging
- Full-Matrix-Capture data acquisition
- GPU-based 3D TFM reconstruction
- Integrated pulser-receiver circuits
- Deep penetration mode
- 2D & 3D imaging support
- Tablet-PC / Laptop remote control
- Software for Android & Windows included
A1040 MIRA 3D PRO
Introduction
High-performance ultrasonic tomograph for advanced 3D concrete inspection and crack assessment.
Features
- True3D® FMC / TFM tomography in real time
- High penetration A-DPC® sensor technology
- Extendable Aperture configuration
- 10-100 KHz operation frequency
- INTROVIEW® software supporting Big-Data visualization
Technical Specifications
- Transducer Array: 4x16 / 8x8 (expandable)
- DAQ Channels: 64
- Penetration Depth: Up to 3 m / 10 ft
- Max Coverage: 10x10 m²
- Frame Rate: 12 Hz (2D) / 0.3 Hz (3D)
- Operating Time: Up to 10 Hours
A1040 MIRA Classic
Introduction
High-penetration ultrasonic tomograph with exceptional resolution and advanced crack sizing capability.
Features
- Extraordinary penetration depth
- Superior near & far-field resolution
- High-durability DPC transducers
- Visualization with NITROVIEW
- 3D imaging support
- Advanced crack sizing
Technical Specifications
- Transducers: 48 (12 groups x 4)
- Measuring Range: 10 - 2500 mm
- Operation Time: ≥ 8 Hours
- Bandwidth: 10 - 100 KHz
- Nominal Freq: 50 KHz
- IP Rating: IP54
- Dimensions: 370x150x145 mm
A1220 MONOLITH UPVT
Introduction
Universal ultrasonic pulse velocity tester for concrete, stone, ceramics and other materials supporting both transmission and pulse-echo methods.
Features
- Works with Piezo & DPC transducers
- Pulse velocity, transit time & thickness measurement
- One-side access SAFT imaging
- Automatic gain control for field use
- Complies with EN, BS, ASTM, IS standards
- High penetration depth capability
Technical Specifications
- Modes: Through-transmission & Pulse-Echo
- Frequency range: 20 - 1000 KHz
- Time resolution: 0.1 μs
- Inspection depth: Up to 15 m (material dependent)
- Operating time: Up to 14 hours
A1410 PULSAR UPV
Introduction
Couplant-free ultrasonic pulse velocity testing with Dry-Point-Contact transducer arrays optimized for on-site concrete assessment.
Features
- Up to 2.5 m testing range
- Portable ergonomic handheld design
- Crack depth measurement capability
- Bluetooth data transfer & mobile app support
- Velocity & waveform display in real-time
Technical Specifications
- Transducer array: DPC wheel array
- Frequency: 50 KHz
- Velocity range: 1000 - 15000 m/s
- Max depth: 2500 mm
- Operating time: 16 hours
- Weight: 420 g
UK1401 Ultrasonic Velocity Tester
Introduction
Compact ultrasonic wave velocity tester for on-site evaluation of concrete and construction materials.
Technical Specifications
- Operating frequency: 50 KHz
- Wave mode: Longitudinal
- Velocity: 1000 - 12000 m/s
- Time range: 12.5 - 150 μs
- Operating time: 16 hours
- Operating temperature: -20°C to +50°C
- Weight: 450 g
PULL-OUT Tester
Introduction
The Pull-Out Tester determines the compressive strength of concrete by extracting metal components inserted before or after casting. Classified as a semi-destructive test, it measures the force required to pull out an anchor from the material.
Features
- Complies with UNI EN 12504-3 standard
- Manual 700 bar pressurisation unit
- Digital pressure gauge (0-400 bar, 0.1 bar resolution)
- Compact, light, and easy maintenance design
- Non-conductive lever for operator safety
Technical Specifications
- Capacity/Force: 10 ton / 115 kN
- Stroke: 50 mm
- Section: 16.5 cm²
- Volume: 83 cm³
- Mass: 3.7 kg
LDV PULL-OFF Tester
Introduction
The LDV Pull-Off Tester measures the adhesion strength between materials like concrete, composites, bitumen, or coatings. It allows quick, on-site tests without embedded inserts.
Features
- Complies with EN, ASTM, BS, ACI standards
- Digital removable display with DaTa 500 connection
- Supports shear and tensile testing
- Accurate load cell with peak/zero functions
- Battery life up to 1 year
Technical Specifications
- Max Force: 2.5 tons (25 kN)
- Accuracy: ±0.020%
- Working Temp: 0-50°C
- Dimensions: 150 x 150 x 145 mm
- Weight: 1.2 kg
- Warranty: 24 months
DR3000 RL Cover Meter
Introduction
The DR3000 RL is a magnetic cover meter for locating and sizing reinforcement bars in concrete, determining concrete cover thickness, and ensuring REI fire certification compliance.
Features
- Complies with BS 1881-204
- Backlit LCD display (128x80 pixel)
- Stores up to 10,000 readings
- USB interface for data transfer
- Robust outdoor design
Technical Specifications
- Bar Size: 6-50 mm
- Position Accuracy: ±3 mm
- Autonomy: 12 hours continuous
- Dimensions: 200 x 170 x 90 mm
- Weight: 0.8 kg
- Warranty: 24 months
Ectha PRO Digital Test Hammer
Introduction
Ectha PRO is a high-precision digital rebound hammer for evaluating concrete strength and uniformity, designed in compliance with international standards.
Features
- Conforms to ISO, EN, ASTM, BS, and JIS standards
- Bluetooth connectivity with Android app (Ectha-R)
- Automatic data logging and Excel export
- Impact mode selection (single/average)
- Lightweight and ergonomic Italian design
- Multi-language user interface
Technical Specifications
- Display: Backlit LCD
- Battery life: Over 20 hours
- Connectivity: USB, Bluetooth
- Compatible app: Ectha-R (Android 4.3+)
- Weight: 1.2 kg
DR3000 PK Cover Meter
Introduction
Compact electromagnetic induction-based cover meter for locating rebar, estimating diameters, and measuring concrete cover depth with precision.
Features
- Complies with BS 1881-204
- Stores over 10,000 values
- Accurate cover & bar size estimation
- Automatic shutdown and rechargeable battery
- Ergonomic, sturdy design for field use
Technical Specifications
- Measuring Range: 1-120 mm
- Bar Diameter: Φ6 - Φ50 mm
- Accuracy: ±1 to ±8 mm
- Dimensions: 170 x 78 x 38 mm
- Weight: 280 g